john can you get these if so i want 1 for my carby

Yes,
I will get the details together...

i think everyone that has a minimoto should have one of these on their bikes, how much better would tuning be once you have your needle and idle jet set, you can adjust the main jet on the day without removing the carby

id get one too looks good

i believe they have problems with vibrations. but if they work

the o rings inside and rubber manifold should minimise viabration quite a lot. but that could be a possibility i will just have to test it when i get 1

I have to check if they are available for PHBG carbs. My general feeling is not. However, if you fit the metal bowl which takes the brass plug, then you can change main jet by removing the plug. I have these bowls and plugs available now.

i'm running the 24mm minki carby on the zpf could you get one for that.

	100%hardcore wrote:
	i'm running the 24mm minki carby on the zpf could you get one for that.

You could probably contact the Mikuni distributor in Australia.

Only registered users can see links on this forum! Register or Login on forum!

93 Ingham Road
Townsville, 4810 .


[/url]

	100%hardcore wrote:
	i'm running the 24mm minki carby on the zpf could you get one for that.

You could probably contact the Mikuni distributor in Australia.

Only registered users can see links on this forum! Register or Login on forum!

93 Ingham Road
Townsville, 4810

i belive that Dave made his own for his higly modded cag's

Yeah he did. Those two where funny blokes and a huge loss to the sport